7 Best Snowmobile Dollies – Comparison & Reviews for 2020 was last modified: April 27th, 2020 by Lucas
This website is reader-supported. When you buy through links on our site, we may earn a small affiliate commission.
7 Best Snowmobile Dollies (Reviews) in 2020
We did our research, critically analyzing the snowmobile dolly reviews that we came across, looking at sales figures, reading experts’ opinions, and that is why we are confident to say that the following models are the ones that we believe to be of great quality.
1. Kastforce KF2014 Snowmobile Dolly Heavy Duty 1500Lbs
Assembling this set of 3 dollies is a fast task and that is because they have a simple but strong construction. They are even stronger than they look.
Be aware that this set is particularly made for snowmobiles and it won’t work on other vehicles. Also, the wheels are rather small and they have been perfected to work well on concrete, rather than gravel or dirt.
The carrying capacity is one of 1500 pounds, which is enough for most snowmobiles. The wheels are made of PVC, highly durable and they swivel around, allowing you to move the dollies in any direction.
Two of the dollies, the ones that go on the skis have a couple of straps on each of them and those can be used to better secure them to the snowmobile. Also, these two steel dollies have a groove in the middle to perfectly fit under the skis.
If you’ve decided to purchase this product, you’ll see that the dollies feature a strong construction, so if you need them for heavy duty use, it shouldn’t be a problem.
With a carrying capacity of 1500 lbs., this unit can transport most snowmobiles, so moving yours around won’t be an issue.
Thanks to the special wheel design that features a PVC construction, the dollies are able to move in any direction, so this is not going to be a problem either.
Since securing the vehicle is important, you might be looking for a strap added to the unit, which is something these dollies come with.
This set is made for hard pavement, so it works better on concrete than on other types of terrains, which is something you should be aware of.
Depending on the length of the track you need to use, some extra care might be required when guiding the snowmobile.
2. Extreme Max Red 5800.2000 Economy Snowmobile Dolly System
These dollies are marketed as an economy set and they are a lot more affordable than other variants. However, they provide a higher quality than some might expect. They are well made and they can be easily handled on smooth and flat surfaces.
You will be able to maneuver your snowmobile in tight spaces due to the swivel casters and the 2.5-inch nylon wheels. The dollies are painted in red and all of them have rubber pads on them to ensure that your snowmobile doesn’t slide out of them.
The 2 dollies designed for the skis have velcro straps that you can use to better secure them to the snowmobile. They all arrive preassembled and they’re ready to use. The dollies for the skis also have a small ¼-inch wide and ¾-inch deep groove on them to ensure a better fit.
You won’t be able to move massive snowmobiles with these dollies but they will do their job well on smaller models. They’re small enough to fit into your snowmobile gear bag.
Even though this product is an affordable one, you will be pleasantly surprised by its quality and by the fact that it can be used for heavy duty jobs.
If you select this model as the next addition to your gear, then you should know that it does a great job of guiding the unit on flat surfaces.
Thanks to the swivel casters included, you won’t have a hard time maneuvering the snowmobile even in narrow spaces.
Thanks to the velcro straps that this model includes, you will be able to secure the snowmobile, as you are moving it around.
In terms of capacity, these dollies cannot move extremely heavy snowmobiles, but for the average one, they do a very good job.
You might want to take a closer look at the details provided to make sure that this model works well for your vehicle.
3. Extreme Max 5800.0228 V-Slides Snowmobile Dolly System
With a surface large enough and a groove running on the middle of them, the two dollies made for being placed under the skis are a good fit for all snowmobiles, no matter the size. The same two dollies have two velcro straps each, so you will be able to properly attach them to the skis.
They also have a glued and riveted rubber padding on them and that will ensure that the snowmobile doesn’t slide around in them and that it stays put.
The “easy roll” wheels offer maximum maneuverability. They can be turned 360 degrees and they are securely bolted to the steel plates.
The wheels are 3 inches wide and they work best on flat surfaces but they can be decent on dirt as well. These powder-coated steel dollies ensure stability and they will not lose their pleasant red color over time.
One of the things that make this Extreme Max unit a very good choice is the 360-degree maneuverability, which means that you won’t have trouble handling the snowmobile on the track you choose.
These ski dollies work for pretty much any snowmobile, which also makes them a highly versatile choice.
Thanks to the velcro straps they come with, you will be able to securely attach the unit so no damages occur while you are moving or transporting it.
These dollies also come with a powder-coated steel construction, which means that they are both sturdy and durable for long-term use.
Given the 3-inch wide wheels these dollies are equipped with, they work best on flat surfaces, and their performance on dirt is fair but less impressive.
The bolts might come a bit loose after a while, so do check them from time to time to make sure that everything is ok.
4. Extreme Max 5800.0200 Power Wheels Driveable Snowmobile Dollies
Although they might not look like so, the wheels of these dollies are steerable due to the cotter pin assembly. They are also quite large, measuring 5 inches in diameter.
Thus, they are suitable to be used on pavement and on rougher terrain too. You can use these dollies on dirt, gravel or grass. You will be able to reach speeds of 5 mph with them.
The dollies have great stability and the two that are made for holding the skis are 7 inches wide and thus can accommodate most sizes.
Both of these come with nylon-coated cables that are used to wrap around the skis. They offer increased stability and make the whole process a lot safer.
In terms of design, these dollies offer a simplistic look, but a sturdy build. Although they have a rough appearance, they protect the skis and snowmobile and they should leave no mark on your garage floor.
If you are looking at reviews because you need a sturdy set of dollies with a simple design and reliable construction, this set is the one you need.
Thanks to the larger 5-inch diameter wheels, the dollies can be maneuvered around grass, dirt, or gravel without too much effort.
Once you lift the snowmobile and you place it on these dollies, you will be able to attain speeds of up to 5 mph, which is pretty impressive for this type of transportation.
Your motor sled is going to be safe as well, as this model includes nylon-coated cables that can be wrapped around the skis for added stability.
These dollies might look a bit simplistic, but they are reliable so don’t let their design change your mind about giving them a try.
The wheel beneath the track might be difficult to center, so a few tries might be necessary.
5. Kastforce KF2011 Snowmobile Dolly Set Max Supporting 1500Lbs
You will notice that these snowmobile dollies have a sturdy appearance and some small wheels. That is because they are made to be used when moving your snowmobile or snowplow from the garage to the driveway and vice-versa. You can also get a snowmobile lift to help you in that process.
The wheels are only 2 inches in diameter, but they are mounted on swivel casters and they will be able to be maneuvered in any direction. Two of the dollies come with durable nylon tie-down straps. They are adjustable and will allow you to secure the dollies well.
These devices are highly wear-resistant and they are capable of holding weights of 1500 pounds, more than enough for a usual snowmobile. The dollies that are made to hold the skis have a groove on them and that part is covered in rubber, to protect the sole of the ski. People are very pleased with how the dollies fit and how well they move on flat surfaces.
These ski dollies are sturdily built, but they might seem a bit small, given that they are specially made to move your motor sled from and to the garage.
A snowmobile lift can come in handy in the process, but the fact that the wheels are mounted on swivel casters means that they can be easily maneuvered in pretty much any direction needed.
Thanks to the strong straps made of nylon, you don’t need to worry about your vehicle’s stability in the process, while the casters ensure that you are not limited in terms of moving your snowmobile around.
Given that this dolly set has an overall weight capacity of 1500 lbs., you won’t have any difficulties using it for the average snowmobile.
Since these dollies feature small wheels, so they should only be used on flat pavement and not on gravel or dirt.
The straps need to be handled with care or they might come unstitched after a while.
6. Black Ice SMDOLLY Snowmobile Dolly Set
This model from Black Ice has a very simplistic look but the steel coated in zinc that they are made of proves that they are a sturdy choice and that they will last a long time. The two dollies that go on the skis are quite high on the outside and they can hold skis of up to 7 inches wide.
They both have wheels that seem large enough to operate on asphalt but also on dirt or even gravel. Because they are mounted using a cotter pin assembly, they can be steered a bit, offering enough maneuverability.
The track dolly has a single wheel positioned underneath on a swivel caster allowing you to move the heavy part of the snowmobile with ease.
Having two heavy-duty steel cables, the ski dollies are durable and will make it easy for you to attach them.
This dolly set features a sturdy construction, so you won’t have any problems moving your motor sled around with its help.
If you use a snowmobile lift to get your vehicle all set on the dollies, then you will quickly see that the large wheels these are equipped with can be used on both asphalt and dirt.
Given the swivel caster that each track dolly is equipped with, you won’t be limited in terms of directions in which you can maneuver and guide the snowmobile.
If you are looking for a product with excellent reviews in terms of durability, then this is the one you should try out.
In case any of the bolts are missing, you can easily find replacements at a local hardware store, so this is good to keep in mind.
The retainer holes might need some slight adjustments upon installation in order to secure the wheel of each track dolly.
7. Performance Tool W41061 Snowmobile Dolly
Straight out of the box, these dollies have an impressive design. The black finishing is surely a nice touch and everything is shiny and gives a nice feel. The load capacity is also significant. You can put a weight of up to 1500 pounds on them and they will stand strong.
Although not impressive in size, the wheels measure 2 inches, but they are heavy-duty and resistant enough so they can hold all that weight.
A feature that sets these dollies apart is the fact that their tops are fully covered in rubber padding. That is an important aspect to consider when you want to move your snowmobile safely.
However, on the bad side, these dollies don’t have any straps, so, if the rubber doesn’t hold the skis, you will have some issues. But the fact that the two ski dollies have a groove on them should help with that, keeping the skis on the middle of them.
The very nice and even elegant design is one of the first things that you are going to notice about this dolly set.
Thanks to the generous 1500 lbs. weight capacity, you won’t have a hard time using these dollies for pretty much any snowmobile.
The wheels are specially built for heavy-duty use, despite their 2-inch size which might seem like not enough to withstand that weight.
These dollies are fully covered in special rubber padding, so your vehicle is going to be fully protected against scratches and damage as you move it around.
The wheels could pivot a little bit better, but this depends on where the dollies are used as well, so it’s not something you should really be worried about.
Given that the wheels are smaller than those on other models, these dollies are best used on flat pavement, so keep this in mind to make sure they do fit your needs.
This Year’s Buying Guide
A good snowmobile dolly should be sturdy enough to keep the whole vehicle balanced. It should also have the features needed to ensure that there are no scratches on the snowmobile after the dolly is used. These are only a few of the attributes that you should take into consideration when buying snowmobile dollies. Here are some others.
Wheels and maneuverability
We have used the concept of maneuverability a lot across this guide and that is because it’s one of the most important features when it comes to dollies. That is why you buy dollies in the first place – because you need to move your snowmobile across different surfaces more easily, not just in snow.
Wheels have the most important role in this aspect. You will want to look for the biggest ones, but only if you want to get over rough terrain easier. The ones that measure 5 inches in diameter will offer you the possibility to move your vehicle on the more difficult terrain. But they are not necessarily good in your garage, where you want to be able to turn the dollies around easier.
That’s where smaller wheels become useful. Many users just want to get their snowmobile out of the garage and on the driveway, and you don’t need huge wheels for that. Some small, nimble ones are great.
It is very important, however, that the dollies have their wheels mounted on a swivel caster mechanism. That allows them to turn 360 degrees. Also, have a look at how many wheels the dolly for the rear rack has. The ones with 4 wheels offer more stability.
If you’re looking for extra warmth in the cold season, we recommend getting a pair of snowmobile gloves. For the same purpose and to keep snow away from your feet, you can also get some snowmobile boots.
Straps and rubber padding
Snowmobile owners care about their vehicles and a device that protects their beloved possessions is a must. This is where the rubber padding comes into play. You don’t want the skis or the snowmobile wraps to get scratched, or even worse, damaged.
Most dollies offer a rubber padding to protect against that. A cheap snowmobile dolly only has the padding on the groove, where the bottom of the ski goes. But the padding has another use too. It makes sure that the skis don’t slide and don’t fall off the dollies.
However, if you want to properly fix the dollies to the ski, make sure they come with straps. Some of them offer one strap that goes over the ski. But the ones with two straps are better because you can get them on each side of the foot of the ski.
There are velcro options when it comes to straps. But you can also find a simpler and possibly more durable solution in steel cables. They are usually coated and they’re very sturdy.
If you’re here, you might also be interested in some of our other articles. Have a look at what we have to say about choosing a snowmobile GPS. Or, maybe you are interested in buying a snowmobile helmet.
As you are going through snowmobile dolly systems, one of the first aspects that you should look at is the unit’s weight. It’s true that any such snowmobile dolly needs to be easy to handle, but, at the same time, it needs to be heavy in order to be able to move the vehicle. In fact, this will also help in moving the snowmobile around easier.
The key part here is for the snowmobile dolly to be able to withstand the vehicle’s weight, which means that you need to take a look at the unit’s load capacity before you take your pick. Otherwise, you may have trouble balancing everything as you are moving the snowmobile, and this is never a good idea since it’s a safety matter before anything.
Plus, given that if the snowmobile accidentally falls off the track dolly, it might get damaged and scratched, you really need to make sure that the model you choose is suitable for your vehicle.
In case you worry that if the snowmobile is too heavy, you won’t be able to move everything around, it’s good to keep in mind that its weight gets transferred to the dolly, so this is not something’s going to be an issue. It’s more important than anything else for the snowmobile dolly to be compatible with the vehicle you intend to carry around.
Another aspect that you need to take into consideration as you are looking for your next snowmobile dolly is the material used for the unit’s construction. Besides the fact that this determines the system’s overall durability, it can also directly impact its load capacity, which brings us to the point discussed above.
Just as you can imagine, snowmobile dolly systems need to be made from strong materials in order to be able to sustain the vehicle’s overall weight. Moreover, this means that it can also evenly distribute the snowmobile’s weight in order for you to easily move it around. Of course, this aspect depends on the design as well, but the materials used definitely matter a lot.
The most common type of material used for snowmobile dolly systems is powder-coated steel, which comes with a series of crucial benefits, such as high load capacity, as well as resistance against rust. It’s pretty clear that these are very important if you don’t want to invest money in a new snowmobile dolly every year, and instead get years of service out of the one you choose.
Other aspects that you should look for in any snowmobile dolly consist of materials and mechanisms that ensure its resistance to extreme temperatures, as well as to frequent use. If you make sure that all of these characteristics are included in the unit you’ve set your eyes on, then you shouldn’t have any difficulty for a long time.
Size & Durability
Of course, just as we’ve mentioned above, you should look for a snowmobile dolly that’s sturdily built, so that you can use it for a long time. This way, it will prove to be a cost-effective solution for your needs, and you will also get the time to learn how to use it, so that every time you need to move your snowmobile, things get even easier.
It’s also crucial for a snowmobile dolly to be durable and strong to protect the vehicle while you are moving it around. As for size, things are probably pretty clear as well, given that you need to make sure that it can sustain the snowmobile without too much trouble. Make sure that the casters fit the vehicle, in order to safely transport it.
It’s also very important for snowmobile dolly systems to include safety features such as straps, buckles, and any other closure systems that ensure your snowmobile remains securely attached to the track dolly while you are moving it. No matter if you are looking at a model that comes with a Velcro strapping system or with another option, the straps need to be long enough to accommodate the snowmobile.
Buy a Complete System
Another good tip is to always get complete snowmobile dolly systems for your own use, which means that they need to include a track dolly, as well as the two necessary sky dollies for your snowmobile. If you do this, then you will be able to carry out your task in the most efficient way, while also keeping the vehicle safe from any damage.
Moreover, having a complete system means that you won’t need to worry about this aspect in the future, and you will be able to use it whenever you need to, in the fastest way. Of course, the decision ultimately depends on how often you use your snowmobile as well, but generally, it’s a good idea to have everything you need so that you can move everything around as you need to.
Whether you go for a complete snowmobile dolly system is also strongly related to the stability that you can ensure for the vehicle as well. However, apart from having everything you need, it’s also important to choose the right model in order to obtain the results you want, every time you use the snowmobile.
Since we’re talking about stability, it’s important to mention that the snowmobile dolly should come with a wide wheelbase, in order to ensure the right level of safety for the vehicle. This is particularly important if you are going to use the snowmobile dolly on any type of uneven pavement.
Things such as gravel or cracked pavement can definitely pose a threat in terms of the whole ensemble’s stability. Therefore, you need to make sure that you get one of the versatile snowmobile dolly systems that can be used for all types of surfaces. This way, you won’t need to worry about this aspect, thus obtaining a lot of peace of mind.
After all, snowmobiles are not necessarily cheap units to have and use, therefore, you should do everything you can to make sure that you safely transport the unit every time. Moreover, if you go for a snowmobile dolly that comes with a wide wheelbase, you will also obtain enhanced maneuverability, as they work better when it’s necessary to reserve the direction.
The same applies in case you need to move the snowmobile around corners or in tight spaces. This can also depend on the way your property looks like, or where you will need to handle both the track dolly and the snowmobile, but all in all, it’s always a good idea to have a versatile and stable unit that you can rely on.
Another crucial aspect when it comes to any snowmobile dolly that you intend to use is the rubber padding that it includes. As we’ve already mentioned, you want to avoid any kind of damage that the snowmobile might incur in the moving process, especially since you may need to do this often.
Therefore, you want to protect the vehicle from any dents or scratches that might take away from the joy of using it. We all know that it’s not fun to notice a new scratch, especially if you really like using your snowmobile, or if we’re talking about a brand new unit. For this reason, the snowmobile dolly should come equipped with reliable rubber padding.
Most models usually include this padding around the platform and attached to it, which also works as an extra safety measure, as it also adds to the snowmobile’s stability, by keeping it in place. No matter what type of track dolly you choose, the padding should always be included, as this is crucial in order to keep the unit safe from damage.
Furthermore, there are snowmobile dollies that include more rubber padding than usual, which is always a good idea. Of course, it’s good to make sure that this padding won’t pose any trouble as you mount the vehicle, although this is rarely the case. If you’ve set your eyes on a particular model, but you feel that a bit more padding could be included, you can also look for some tailored solutions.
You can try to make some extra padding yourself or, if you are not sure how to go about this, you can always ask other snowmobile owners about their experiences. After all, if you go online, you’ll surely find plenty of communities where people who are just as passionate about winter riding as you are can have plenty of extremely useful tips and tricks.
This is the great part about living in today’s world, namely that you can find a lot of information right away, so you shouldn’t hesitate to either join online communities or look for local ones where you could get a lot more details on how to best transport your snowmobile.
Frequently asked questions
Q: What is a snowmobile dolly?
A snowmobile dolly is a tool specially made to help the user move the vehicle around. The wheels provide the necessary maneuverability to get the job done, while other elements such as rubber pads and straps ensure that the motor sled is held securely in place.
These units can feature wheels of different sizes, from 2 inches to even 10 inches, and depending on this indicator, the dollies can successfully be used on various types of terrains. Those featuring smaller tires are suitable for smooth surfaces such as asphalt or concrete, while the ones with larger tires can be used for dirt, gravel, or grass terrains as well.
Depending on how you will need to use the dollies and on your snowmobile’s weight, you have to choose the right model that can ensure the desired results. Ski dollies have the purpose of making your life easier in terms of moving your snowmobile around your garage or property.
Q: How do I use a snowmobile dolly?
The answer to this question depends on various factors, one of them being the type of dolly that you plan on using. There are some models that can be simply placed under a snowmobile and then used to lift and carry it, while others need to be placed under the vehicle once it’s lifted using a snowmobile lift.
The choice you make depends on the type of terrain that you are going to transport the snowmobile across. However, the dollies need to be properly placed under the vehicle to make sure that everything is centered properly. This way, there’s a much lower risk of accidents or potential damage to the snowmobile.
Then, you also need to make sure that you secure it to the dollies, by using straps to keep everything in place. Other safety and protection elements such as rubber pads come in handy as well, so they should be used whenever possible.
Q: Based on what criteria should I choose a dolly?
When choosing a dolly, the first aspect you should take into account is the snowmobile’s weight. You need to make sure that the carrying unit you choose can safely sustain a certain capacity to avoid any accidents. Furthermore, you also need to think about the way you are going to use the dolly and the terrain you want to carry the vehicle across.
Those who need to simply carry the snowmobile from the garage into the driveway and to a truck can do this using dollies with small but sturdy wheels. However, those who will need to carry the vehicle on various terrains, such as dirt or gravel, should go for dollies with larger wheels.
You also want to choose a dolly set that is versatile, since this can also mean you will be able to use it for other purposes as well, and that is easy to maneuver, thanks to elements such as swivel casters.
Q: Can I damage my snowmobile using a dolly?
There are ways in which a snowmobile can get damaged when using a dolly, but this shouldn’t be the case if you take all the important aspects into account and if you follow the manufacturer’s recommendations in terms of usage. If the dolly set you choose cannot sustain the snowmobile’s weight, then there is a high chance that things are not going to go well.
If the dollies break, the entire vehicle might move in unexpected ways, thus getting damaged or, in a good-case scenario, a little bit scratched. The same goes if you don’t make sure that everything is securely attached using straps and rubber pads. This is especially important if you need to carry the snowmobile on rougher terrains.
Furthermore, you also need to make sure that the vehicle is properly centered on dollies, and the other way around, to avoid any situations in which it might accidentally slip.
Q: What’s the difference between snowmobile dollies?
There are three different types of dolly models out of which you can choose. The first one is the three-part type, which is also the most popular one. The idea behind it is pretty simple, namely that three small rollers that look like platforms are placed under the vehicle, one for the track and one for each ski runner.
The lift type of dolly comes with at least two wheels and a tall frame, and it’s the right choice if you need to do some repairs as well, given that it can be used as a lift or a stand. The simple yet effective design makes this alternative very easy to use, so it’s one to keep in mind.
The third type of dolly is the easy-load one, which is also a rather new addition to this line of products. The design is a very simple one-piece solution, and the unit also includes an impressive feature that ensures easy snowmobile loading.