This Year’s Top Motorcycle Jacks, Lifts, and Stands Reviewed
If you are looking for the best motorcycle jack, you will find the information you seek right away. We looked through the various models available on the market, compared them based on the many reviews offered by users and experts, and discovered that you should put the Powerbuilt 620422E on top of the list. With a maximum lifting capacity of 2 tons or 4,000 pounds, this model exceeds the ANSI standards, and you will have no issue with lifting even the heavier motorcycle you might own. Compared to a floor jack, this model is more compact, lighter, and even less expensive, a few things that you may want to bear in mind if you are searching for the best deal around. The flat base is wide enough to avoid ‘sinking’ incidents. In case the Powerbuilt 620422E is no longer available, we also suggest the Orion Motor Tech Dilated Scissor, which is almost just as good.
Our Team Recommends
While reading the motorcycle lifts reviews available, we noticed that many products have an average and above average performance. We selected the ones with the highest performance so you can quickly take your pick.
Powerbuilt 620422E (B00336EN60)
The model comes equipped with a flexible design, and it is suitable for lifting more than just motorcycles. Because it has a lifting capacity of about 4,000 pounds, it can lift vehicles, ATVs, and even trucks. Due to its versatility, you can expand its usage as you see fit.
You can always opt for a floor jack, but that can be quite expensive; plus, it will take up a lot of room. A good motorcycle jack should be compact and inexpensive, and this particular model fits the bill perfectly.
Orion Motor Tech Dilated Scissor (B01M0AB7MJ)
You will be thankful for the rubber deck that makes sliding on the floor impossible, hence preventing accidents. Always check the platform dimensions when you are shopping for a good motorcycle lift, to see if you can accommodate it in the space you have at your disposal.
The surface is resistant to dirt and oil, and you will have no trouble with keeping it in mint condition. Make sure to use it only for motorcycles, as it is not indicated for dirt bikes, ATVs, and snowmobiles. Shop for specialized ATV ramps, if this is the type of vehicle you prefer.
XtremepowerUS 1100Lbs (B00K30NBOY)
This model is very straightforward, and you will not have to worry about parts and pieces that can get damaged easily. It comes with two screw adapters that will allow you to adjust the height of the lift with ease.
You can operate the lift through the crank jack available. Everything about this model spells ease of use. The 3-inch wings on the sides provide the lift with extra stability. The same purpose is achieved by the wide base that will not allow your motorcycle to topple over. Of all the stands and lifts available for sale, you can choose this one for ease of use and high performance at a decent price.
PowerZone 380047 (B003UM9GDM)
You can use this model for both motorcycles and ATVs. As many models do not offer such versatility, and if you have ATVs in your shed, as well as motorcycles, you will appreciate this particular feature. The model comes with a T-Handle for a secure grip; in case you don’t need it, you can remove it.
The safety lock has multiple positions, offering even more versatility. A nice aspect of this particular model is that it can be collapsed to a compact shape so that you can store it away without a hassle. The frame of your motorcycle or ATV will be protected by the rubber pads that will grip the saddle and keep it in place.
BikeMaster TLMLTD-01 (B00SASWL60)
Letting your motorcycle to free fall is not an option because this is how extra damage occurs. The deck height can be adjusted, and you will find this lift a good option for various bikes. Plenty of the reviews of motorcycle stands will tell you that this model ticks all the right boxes regarding performance and durability.
The bike will not slide from the grip, as the lift comes with a solid anti-slip pad. The high versatility of this stand makes it stand out. You will appreciate having a lever lock that allows you to keep it in a raised position for a long time.
Extreme Max 5001.5044 (B0196PAZ1S)
You will appreciate the heavy-duty steel frame that makes this lift durable and reliable. Everything you use that is related to this particular activity, from motorcycle gloves to equipment such as this, must be made from materials that can stand wear and tear.
When you need to take care of regular maintenance, it is a good idea to have a reliable lift like this one to help you get under the bike for a close inspection.
The collapsed height of the lift is just 3-3/8 inches, which means that it takes up little room in the shed. You will surely find a place to store it away, and you will have it available, each time you need to inspect your vehicle.
OTC 1545 (B000OCHCIW)
The 1,500-pound lifting capacity is one of the biggest assets of this model, but not the only one. For instance, you can use it for lifting larger cruisers, due to the 17-inch skids it comes along with. The lowest level allowed is 3-1/2 inches, while the highest is 16-3/4 inches.
You will appreciate having free access to the lifted bike, by removing the handle on the lift. The automatic safety lock ensures that you will not have to worry about any accidents. There are also additional straps employed that allow you to put down the load with ease, and without any glitches.
Strongway Hydraulic (B00UAOLA7I)
The model comes with five lockable heights, and you can quickly pick the one you need for the repairs you need to carry on. You can also use this jack as a support stand, which may make your shed look a bit more organized. Many of the reviews of motorcycle jacks available online mention this aspect as an excellent plus.
The jack can lift 1,500 pounds and, as shown earlier, it has various applications. The high-grade steel used for the frame makes it an excellent and reliable choice, while the lead-free paint will prevent rust in the long run.
Venom Motocross Racing (B016Z035LY)
You can use it to lift dirt bikes up to 650cc, and the maximum lifting weight allowed is 350 pounds. The extendable height goes from 12 inches to 15 ½ inches, and the lift is a good fit for Yamaha dirt bikes in particular.
Use this lift for small repairs and maintenance. You will find it convenient and easy to use. It is a great thing that you can also use it for storing your dirt bike, so you do not just leave the vehicle on the floor. Due to the heavy duty construction, this lift is an excellent investment. The mesh tool tray is a nice touch and allows you to keep all your tools in the same place.
Roadstar 1500LB (B0721MSV9K)
There are three positions for locking the mechanism in place, depending on what you intend to do. You can use this jack for your motorcycle, but you can just as well use it for an ATV or a tractor. Even snowmobiles and watercraft devices can be lifted with the help of this jack for regular maintenance.
When the jack is loaded, the locking screws will make sure that the jack will not drop the load by mistake. You will appreciate how mobile the jack is, due to the four casters it comes equipped with. Ideal for small vehicles, like dirt bikes and ski jets, the model is quite versatile.
Smartxchoices Motorcycle Wheel (B01L8QGMMO)
This model is created with durability in mind. Besides using heavy duty steel for the construction, it is coated with a special finish powder that will prevent any rust and corrosion. The lift comes with rubber feet, so you don’t have to worry that the device will start slipping while you’re using it.
This jack is ideal for locking your motorcycle in an upright position so that you can operate small repair and maintenance tasks. Also, you can use it for storing your vehicle, and even for easy transportation. The steel wheel chock is as durable as the rest of the jack. The locking mechanism is dependable, and you can release the wheel with ease, once you’re through with your maintenance job.
This Year’s Buying Guide
Many people love the freedom that comes with riding a motorcycle, but you must be aware that such a vehicle requires maintenance, just like a car.
The good news is that you will not have to care for a bike’s maintenance as much as for a car, in the sense that small repairs can be made at home, without paying premium prices at a repair shop. For that, however, you need a lift or a jack, and here you will find about how to get the best motorcycle lift out there.
Before deciding what model you should buy, you need to be aware that there are a few types of jacks and lifts available. For instance, floor jacks are quite popular, due to their ease of use. A floor jack looks like a low unit on top of which you can place your vehicle. These models come with wheels, and they can be moved around as the need arises.
If you want the best motorcycle lift jack available, this may be the right design for you. You can maneuver it with ease, and it usually comes with a long handle that allows you to lift it as you see fit. However, if you want a more portable model, you may want to go for a scissor jack instead.
When you have to lift your vehicle off the ground, a hi-lift is the model you need. This can lift the entire weight of the motorcycle off the floor, lock the required height and allow you to go underneath and operate the necessary tasks. While there are such models used by emergency services, there are plenty of models for home use, as well.
The main advantage of this type is that it gives you freedom of movement while you handle the repairs. Usually, hi-lift jacks are compact, and they can be collapsed to a small height, letting you find a place for them in your shed without a headache.
You can also opt for a stand. This will not only allow you to lift the vehicle off the ground, but it will let you use it for storage, just as well. As always, bear in mind that you should pay attention to the specs, to see what maximum weight is accommodated. Also, when you repair your vehicle, use the necessary protective equipment, such as noise cancelling earbuds.
Maximum lifting weight and height
This is not something to take lightly. The best motorcycle lift table can prove an unfit solution if you exceed the recommended lifting weight. There are models on the market that can lift motorcycles and small cars just as fine, but not all are made for such tasks. Carefully read the spec description offered by the manufacturer to see what you can use the lift for.
Usually, the manufacturer will explain what vehicles can be lifted using their product. This will give you a clear idea of what you can utilize the lift for. Also, the maximum weight limit is calculated in pounds and tons; models with a maximum lifting weight of around 1,500 pounds are considered quite a good option for motorcycle owners.
Besides maximum weight allowed, jacks and lifts will also offer a certain maximum height. This will tell you how high you can lift your vehicle.
Maximum height is calculated in inches and can be a clear indication if the model you are looking at is a good option for you or not. Always look for a model that has a large height range so you can comfortably pick the right one for you.
It doesn’t hurt to go for an option with multiple lockable positions. This way, you will know that you will not risk dropping the vehicle by accident, as such models come with safety locking mechanisms in place.
You need to make sure that the lift or jack you purchase is durable. The frame should be made from heavy-duty steel tube, to ensure that you will not have a problem with it, even after lifting your motorcycle or any other vehicle that the lift can accommodate, multiple times. It serves to get a model that has the frame painted with a powder finish that prevents rust and corrosion.
If you want the best motorcycle stand and lift in the same package, you should aim for a model with good durability. The lift should protect the motorcycle tires and should not drop the vehicle on the floor when you release it. Some extra straps for this type of operation should be in place.
Even if durability is crucial, do not forget that you want your lift or stand not to take up a lot of space. The best idea is to go for a model that collapses to a reasonable height, and also has a compact size. Those with lockable casters are a good idea because they can be moved around with ease.
Another thing that must be mentioned here is that you should get a model with some anti-slippage features. Some have rubber feet, while others have a rubber mat on the bottom. This will ensure that your floor will not get damaged, but also that you won’t have to worry about accidents while operating the usual repairs.
Some people want a good motorcycle stand and do not care too much about other features. However, if you are looking to make a sound investment, you might want to consider the versatility of the device. Can it accommodate more than just motorcycles? Can it deal with ATVs, utility vehicles, or dirt bikes?
Also, do you want the device only for storage purposes, or do you want one that can lift your motorcycle for easy repairs? Ease of use comes into play, too. How do you operate the lifting mechanism? Do you use a lever or a foot pump? All these questions should be answered before you should proceed to purchase a lift or a jack.
Frequently asked questions about motorcycle jacks, lifts, and stands
What is a motorcycle lift?
In case you prefer to run your motorcycle maintenance at home, in your shed, you might need a motorcycle lift. This device looks like a table and comes with a lifting mechanism, which allows you to get under the motorcycle and operate the necessary repairs.
This will prevent any neck and back straining on your part, and lets you reach the more difficult parts of your vehicle with ease. Repair shops usually use such lifts, but the difference between the models they use and the ones you can buy for home is usually a higher lifting weight limit.
How to lift the front wheel of a motorcycle?
There can be many situations when you need to operate small repairs on your vehicle. While on the road, it serves to have some tools in the motorcycle backpacks you carry around. However, some repairs may not be that easy to perform. For those, you need some extra help.
To lift the front wheel of a motorcycle, you will need a jack. This is usually an inexpensive solution, and you do not have to invest in a floor jack. A scissor jack can be an easy solution, and you can find such a model at an inexpensive price.
Can I make my motorcycle lift?
If you operate small repairs on your motorcycle once in a while, you may find it difficult at times to reach certain areas under the vehicle. These are the situations requiring the purchase of a motorcycle lift. However, you might not have the money for such an expense, because you maybe just bought a pair of expensive motorcycle boots.
You can make your lift at home, using nothing but a piece of wood and some galvanized pipe. Using power tools, such as a drill and a saw, you can improvise your lift using these materials, without spending a hefty dime.
What are motorcycle stands used for?
A motorcycle stand can come in handy in many situations. For instance, you can use stands to lift your motorcycle off the ground, so that no pressure is put on the wheels. That will ensure that the tires are in top notch condition all the time.
Also, you can use stands so you can quickly clean the tires. Other people just use stands so they can reach under the motorcycle for repair jobs. If that is the purpose you want to use stands for, remember to wear protective gear and not your usual motorcycle goggles.
Are motorcycle stands universal?
If you want to lift your motorcycle using stands, you will want to know if just any model you will buy will work for the model of motorcycle you have at home. The truth is that single sided wing motorcycles can be accommodated by the same stands, so it can be said that they are fairly universal.
However, if you have a model with a wider wing, that could be a problem. Always check with the manufacturer of the stand to see what models they allow to be accommodated when using their product. They should be able to provide you with a list.
How does a motorcycle jack work?
A motorcycle jack can be very useful when you need to lift your bike a little so you can reach a problematic area. The way such a device works is quite simple. You need to slide the jack under the bike and secure it in place.
After that, you should lift the jack by using the provided pump or lever. This will bring the motorcycle to the required height to allow you to reach the area you have trouble with. Remember to bring the bike down on the ground with care, so that you don’t end up with having more repairs to do.
Can a motorcycle jack be fixed?
Usual problems that can occur with a motorcycle jack are usually related to the pump no longer working. You will have to check the model you have for any blown seals and see how the pump behaves.
Some motorcycle owners recommend pumping the pump multiple times until it starts working again. As with any hydraulic components, if there is a leak involved, you might not be able to repair it on your own. If you have an inexpensive model, try getting another, more durable, this time.
Types of motorcycle floor jacks
One of the most inexpensive devices for lifting your motorcycle off the ground for easy maintenance and small repairs is a floor jack. This usually takes up very little room, and it comes in handy for a broad range of situations. You can choose between two types of floor jacks.
These are the most common type available, and they are often used by motorcycle owners. You will not spend a lot of money on such a device, and you will also find it easy to use. The scissor jack comes with two diagonal metals attached with hinges. The two parts are connected with the help of a screw.
You will notice that the shape of the two parts looks like a pair of scissors, hence the name. Use a spanner to turn the screw and notice how the two parts come together, lifting your motorcycle. To lower the motorcycle to the ground, you will have to turn the screw to the other direction. You can safely use such a jack for lifting ATVs, too.
This type is called a hydraulic jack, due to the mechanism that helps you lift your motorcycle off the ground. The device is operated by a hydraulic pump, and it is a step up from your usual scissor jack. Do not be surprised to see that these jacks are more expensive. Truth be told, they can make your job a lot easier.
The hydraulic pump operates a small piston. While you may feel like you are not doing much, the mechanism begins lifting the motorcycle. Such a model can handle large motorcycles, and some can lift up to 2,000 pounds. Professionals opt for floor jacks, and even for home use, you will want a potent device like this. Along with motorcycle locks, such devices are almost indispensable.