Top 11 Best Motorcycle Battery Chargers in 2018 – Review & Buying Guide
Whether your battery is low on power or you just want to make sure that you can keep it at optimal levels throughout the winter, then getting the best motorcycle battery charger is the way to go. However, there are way too many models on the market to be able to make an informed choice without investing lots of hours for doing research. The good news is that you don’t have to waste your time since we’ve done all the work. We’ve looked at some of the most appreciated battery chargers and compared capacities and features to make the best recommendation. The Battery Tender 022-0148-DL-WH is our top choice. It comes with 4 independent chargers, a 12-volts and 1.25-Amp charging capacity, 4-step microprocessor-controlled charging, and plenty of safety features to prevent any damage. In case this product is no longer available, you might also like the BatteryMINDer 2012.
Our Team Recommends
You’re probably trying to find a proper battery charger but really have no time to spend reading dozens of motorcycle battery charger reviews. If that’s the case, we’ve showcased some of the most popular chargers on the market below so you can pick the one that offers the most bang for the buck.
Battery Tender 022-0148-DL-WH
If you’re looking for a reliable 12V battery charger to maintain your motorcycle’s battery in top shape, then this Battery Tender model is just what you need. The 022-0148-DL-WH comes with a 4-Bank Battery Management System which allows you to charge up to 4 batteries at the same time.
This versatile device uses advanced microprocessor technology which prevents overcharging your battery, saving it from potential damage. The module uses a 4-step program which ensures a proper charging every time. The charger features a bulk charging mode as well as a float mode, which means that after the battery is at full capacity, it will be kept there indefinitely.
This unit is perfect for charging recreational vehicles such as motorcycles, ATVs, snowmobiles, and it allows you to charge multiple vehicles in one go. You get to enjoy spark-proof connectors, as well as protection against short-circuits or reverse polarity. You get a charging capacity of 12 volts and 1.25 Amps for each charging bank.Buy from Amazon.com for ($126.12)
This BatteryMINDer charger is a great option for both daily commuters and occasional road warriors. The 2012 model comes with a temperature sensor that can operate at temperatures between 0°F and 130°F. This sensor makes sure that your battery gets properly charged in any kind of environment so you don’t risk undercharging or overcharging.
You get a diagnostic LED indicator which can display various info such as power, low battery, weak battery, bad cell, charge level and stage, etc. This helps you detect any potential problems as well as ensure that your battery gets charged at optimal levels at all times.
Thanks to the use of smart technologies, this device can maximize the capacity and life of your motorcycle battery or even revive dead batteries, saving you money in the process. This unit is capable of automatic pulse desulfation at high frequency. The charger is also waterproof and it can maintain one to six 6V or 12V batteries at a time.Buy from Amazon.com for ($79.99)
Battery Tender 021-0123
The Battery Tender 021-0123 is an affordable 12V charger that can help you maintain as well as revive batteries. This model comes with spark-proof connectors which prevent any fire hazards, especially in cases where hydrogen gas is released during the charging process. This unit also comes with short-circuit and reverse-polarity protection to ensure maximum safety.
This model is a good option for charging lead-acid batteries, as well as flooded or AGM (Absorbed Glass Mat) batteries. The charger features a 4-step program that ensures your battery gets charged fast and then maintained at proper levels through float charging. This helps with optimizing battery capacity and prolonging its life.
This smart charger can switch automatically from normal charging to float charging when the battery is full. You also get a LED with two colors which shows you the stage of the charging process. With the 12-foot cord, you get to charge batteries in a safe environment away from any objects that could become damaged.Buy from Amazon.com for ($24.32)
Schumacher SEM-1562A-CA 1.5Amp
The Schumacher SEM-1562A-CA is a versatile 6-volt motorcycle battery charger that can also charge 12-volt batteries. You can charge batteries for any kind of vehicle, from motorcycles and ATVs to cars, trucks, and boats. You get a quick-connect harness which enables you to clamp the connectors or disconnect from the battery in no time.
This model comes with automatic voltage detection so you don’t have to worry about improper charging or potential accidents. The multi-phase charging process ensures a proper charging speed which optimizes power and capacity. Once the battery is fully charged, the device will switch to float mode monitoring to ensure that it is always ready.
Thanks to the smart LED display, you get to know when the device is charging, when the battery is full, or whether there’s a problem. This unit is perfect for maintaining your stored batteries charged. It also comes with a solid plastic case, as well as jump cables and ring connectors.Buy from Amazon.com for ($36.79)
Motopower MP00205A 12V
The Motopower MP00205A is an inexpensive 12V charger that is great for charging and maintaining batteries for motorbikes, cars, RVs, and other vehicles. This unit is fully automatic so you don’t have to waste your time supervising the charging process. All you need to do is to connect it to a battery, plug it in, and let it do its job while you go about your own business.
Thanks to the microprocessor-controlled program, this charger will monitor the charging process at all times and ensure that it stops when the battery is fully charged. This means that you don’t have to fear having the battery overcharged and possibly damaged.
You can also leave the battery connected and let the charger work in float mode so you get to ensure that it is ready when you want to get going right away. This 800mA charger works well with lead-acid, flooded, or sealed batteries. You also get multi-level protection against hazards.Buy from Amazon.com for ($32.5)
Morange MBC010 12V
Whether you have a motorcycle, an ATV or a car, the Morange MBC010 is a versatile charger that can help you maintain your 12V batteries at optimal levels at all times. This device is small and compact, allowing you to use it even in narrow and tight spaces.
With the O-ring terminals and battery clips, you get to start charging the batteries fast. The connectors are spark-proof and also benefit from reverse-polarity and short-circuit protection. You get a DC cord that is 6.6-feet long so you don’t have to keep the battery near the power outlet. The 2-color LED indicator lets you know about the stage of the charger.
This trickle charger works with a variety of lead-acid batteries, fully charging them and then entering the float mode to maintain them for a long period of time. Just make sure that you use this only on 12-volt batteries and not on 6v, 24v, or other batteries as that may result in irreparable damage.Buy from Amazon.com for ($17.99)
LST 6V/12V 1.5Amp
Whether your motorcycle battery is fully drained or you are looking for a maintainer to keep it at optimal levels for indefinite periods of time, then the LST 6V/12V charger is just what you need. This unit can charge both 6-volt and 12-volt batteries at a rate of 1.5 amps per hour so you get fast charging as well as float charging once the battery is full.
This charger is ultra-compact and lightweight so you can also take it with you on long trips and make sure you don’t end up stuck in the middle of nowhere with a dead battery. You can easily charge your motorcycle, SUV, lawn mower or car battery thanks to the automatic mode so you don’t have to spend time supervising the process.
The microprocessor-controlled charger ensures high performance and long service life for all your batteries.
You also get a LED indicator to display charging info, as well as protections against overcharging and other hazards.Buy from Amazon.com for ($39.96)
NOCO Genius G3500
The NOCO Genius G3500 is a highly appreciated battery charger that comes with a multitude of functions and protections. This device works with both 6V and 12V batteries, and it can charge lead-acid as well as lithium-ion batteries with a capacity of up to 120 amp-hours.
Thanks to the use of cutting-edge technology, you get a high-performance charger that can charge up to 3.5 Amps per hour. Not only do you get to charge or repair neglected batteries, but you can also keep them in top shape thanks to the intelligent float mode system. This portable battery charger for motorcycles is compact and lightweight so you take it anywhere with you.
This unit is among the safest in its class so you can leave it plugged in 24/7 without worrying about a thing. A microcomputer guides all activities for efficient charging and minimum energy consumption, while also offering multiple levels of protection. This model can also charge CANbus systems.Buy from Amazon.com for ($53.94)
Schumacher XM1-5 1.5Amp
With the Schumacher XM1-5 motorcycle battery charger and maintainer, you get increased performance when charging your 6V or 12V batteries. Whether you want to revive a dead battery or keep all other batteries at full charge for longer periods of time, this model can help you thanks to its automatic mode and multiple protection features.
You get reverse-hookup protection so you don’t get your battery damaged if you accidentally make a mistake when connecting it to the charger. This 1.5-amp charger will get your battery at full charge in no time and then keep it there with its float mode. The LED display shows you if the battery is properly connected as well as whether it’s charged or charging.
This smart charger also automatically detects if the connected battery is a 6V or 12V variant and switches to the appropriate charging program. This unit is also small and weighs very little so you can effortlessly take it on trips.Click to see the price on Amazon!
BLACK+DECKER BM3B 6V/12V
The BLACK+DECKER BM3B is a flexible charger and maintainer that can be used for 6V as well as 12V battery systems. You get to charge AGM batteries, GEL, and even WET batteries at a rate of 1.5 Amps per hour. This device comes with a solid case that keeps it protected from moisture, dust, and other elements that could affect its circuitry.
This unit offers 3 ways to charge your batteries: clamps, O-rings, and a DC plug. You get to connect your battery to the charger in no time with the clamps, while the O-rings are better suited to long-term charging of stored batteries.
The DC plug is the perfect choice if you want to charge the battery from inside a vehicle such as a car.
This charger is very easy to use: connect the preferred connectors to the battery, slide the switch to the 6V or 12V mode to suit the battery type, and plug in the charger.Buy from Amazon.com for ($13.99)
Schumacher SC-10030A SpeedCharge
In case you’re searching for a high-end charger for your motorcycle battery, then the Schumacher SC-10030A SpeedCharge is perhaps one of the most sensible choices. This is a 2-amp motorcycle battery charger in the slow mode, although it also features a 12<>30-amp mode.
This product is designed to work with a variety of batteries, from absorbed glass mat to deep cycle to gel cell batteries. This versatile unit comes with a 100-amp engine start function for a lot of jumpstarter power, as well as battery and alternator testing functions so you know in advance if something is wrong.
With the touchpad, you get to choose the battery type that you intend to charge. The powerful microprocessor that controls this charger monitors the voltage level of the connected battery so that it can automatically cycle between different phases, from desulfation to bulk charging to monitoring to drip charging to keep the battery at full charge for longer periods of time.Buy from Amazon.com for ($79.95)
This Year’s Buying Guide
If you’re looking for one of the best battery chargers for motorcycles but don’t know much about these types of devices or which of the numerous models to go for, then you’re in the right place. Here are a few things you might want to know about battery chargers and their most important features so that you can choose the most suitable model to keep all your batteries at full charge.
Smart charger vs trickle charger
While trickle chargers can provide you with an inexpensive way to charge your dead batteries, they aren’t the best choice nowadays, especially with so many smart chargers around. A trickle charger will apply current to your battery at all times, even if the battery is full.
That makes it a good choice if you can supervise the charging process and want to save a few bucks on the device. However, if you plan on leaving your motorcycle in the garage during the winter months, then a smart charger is what you need. This device is fully automatic so you don’t have to keep an eye on it or disconnect the battery when at full charge.
If a trickle charger may overcharge your battery and cause damage, a smart charger will only apply current until the battery is full, and then only start charging when the voltage has dropped below a specific level that you may or may not be able to set manually.
While more expensive, a smart charger or maintainer will allow you to keep your battery connected indefinitely so that you don’t risk having the battery or motorcycle electronic systems become affected by a long period of inactivity.
Choose a versatile model
Whether you’re looking for a battery charger for BMW motorcycle or a universal charger to work on your bike as well as on the car, tractor, or boat, then you surely want to go for a versatile model. The good news is that there are quite a few models that come with multiple modules which not only work on a variety of vehicles, but they also come with multiple charging modes.
You can get a microprocessor-controlled device that can feature 3 or 4 charging stages such as initialization, bulk charging, monitoring, and float mode. A good motorcycle battery charger will also come with a desulfation mode which it achieves through pulse charging at high frequency. A charger with a desulfation mode can effectively revive a dead acid-lead battery.
A battery that’s been left unused for extended periods of time can suffer from a buildup of lead sulfate on the plates, which in turn results in the battery being unable to hold much charge. Through a desulfation process, the crystals are broken down, leaving the lead plates clean and helping restore functionality and battery capacity.
Get a resistant charger
Especially if you’re planning to go on a very long trip during which the motorcycle might not be used all the time, getting a rugged battery charger might be the best thing to do. You want a model that has a strong plastic case that’s waterproof and dustproof so you don’t risk having it damaged down the road.
You might also want a charger that can operate at extreme temperatures. You can easily find chargers that can work at temperatures from 0°F to 130°F without overcharging or undercharging.
Maintain battery health with a solar charger
If your motorcycle often gets left unused and you keep it parked outside on your property, then you might want to consider getting a solar battery charger for motorcycles. Such a device will trickle charge your battery and maintain it at healthy levels throughout the winter or when you’re not taking the bike for a ride.
These solar chargers are an ideal choice if you’re leaving your motorcycle in areas where there’s no electricity. You also get weatherproof connectors as well as extreme temperatures functionality out of a quality solar charger. However, you shouldn’t expect the charging process to be fast, especially when the charge current is usually between 10 and 100 mA.
Other features to consider
When looking at chargers for sale, you might also want to ensure that the model you’re getting comes with more than one way to recharge your battery. You want the charger to have the standard clamps for easy and fast charging, but also some O-ring connectors that are great when you’re planning to leave the battery connected to the charger for long periods of time.
If you think you’re going to use the charger on a car as well, then it wouldn’t be a bad idea to look for a device that also features one or more DC plugs for extra convenience so that you don’t have to get your hands dirty to charge the battery.
Protection is very important when charging a battery, and that’s why you should pick a charger that comes with spark-proof connectors, as well as reverse-polarity and short-circuit protection. You might also want to look at charging rates so you can decide whether you want a slow maintainer or a fast charger.
Get more info on the charging progress
Another extremely helpful feature is a LED indicator display. With older models, you never knew if the battery was actually charging, when it was fully charged, or whether there was a problem in the system. Thankfully, many modern chargers come with LED displays which can be simple or more complex.
A simple indicator will show you when the battery is charging and when it’s at full capacity. More sophisticated chargers will show you a lot more info regarding the charging progress, charging level and stage, as well as diagnostics for potential problems. With such a device, you can also check to see if the battery is just low on power or nearing the end of its life cycle.
Frequently asked questions about motorcycle battery chargers
Can I use a motorcycle battery charger on a car?
You can use a motorcycle battery on a car, but you’ll probably need at least 12 volts to start a car battery. A motorcycle battery charge is meant to charge at much lower rates in order to avoid causing damage to the cells or other parts of the battery. What this means is that you’ll have to be really patient if you want to fully charge your car battery.
This is valid for special motorcycle chargers. For multi-purpose units that work both with 6V and 12V batteries, you can actually charge the batteries of a wide range of vehicles.
How to test a motorcycle battery charger?
Whether you suspect that something is wrong with your motorcycle battery charger or you just want to test a new model, you can do so with the help of a voltmeter. The first thing you need to do is to take a voltmeter, adjust it to DC volts and set it to the 20-volt range.
Now place the voltmeter leads to the terminals of the battery while making sure you don’t mix positives with negatives. You should then start the engine of your motorcycle and accelerate until you hit around 3,000 RPM. Check the voltage reading with your manual to see if the values are normal and decide whether the charger works well or not.
How does a motorcycle battery charger work?
Getting all the technical details right would probably require you to read a small book on the actual mechanisms and charging process. What you need to know is that a motorcycle battery charger, or any charger for that matter, works by applying a constant DC or pulsed DC power to the battery.
Trickle chargers have slow charging rates because they force only a small amount of current through the battery. You can also get fast chargers that can charge 2 Amps or even more per hour and get a low battery up to full charge in just a few hours.
Can you leave a motorcycle battery charger on overnight?
You can definitely leave your battery connected to a charger overnight with most modern models. While older trickle chargers posed a threat to the integrity and safety of the battery, current models actually feature multiple charging modes that prevent such damage.
A standard charger will come with at least one normal charging mode and a float mode, the latter which will only keep the battery fully charged without overcharging it. With some models, you can leave your battery connected for extended periods of time and ensure you have a full battery ready to go anytime you need it.
What’s the best motorcycle battery charger?
There’s no way to point to a specific make and model of battery charge and claim that it is the very best. Each charger comes with its own specifications, features, pros, and cons. Prices also range widely from one model to another, influencing what one might call the best charger.
What is important is that you look at your own motorcycle battery and then check the specs of some of the most popular models available online. Doing so will enable you to select a charger that comes with all the features you want and none of the ones you don’t need.
Best motorcycle charger brands
The Deltran Battery Tender is a family-owned manufacturer of battery chargers and other electrical devices that is based in DeLand, Florida. The company has gained recognition both locally and nationally, with a new line of products on the market offering amazing new features that are great for reviving old batteries or maintaining new ones in top shape.
One of the company’s main strategies focuses on innovation while also trying to cater to customer satisfaction, and this is greatly reflected in the low prices commanded by many of its products. With a Battery Tender, you can easily keep batteries charged at optimal levels with a minimal investment.
The Battery MINDer is a line of high-performance battery chargers which are manufactured by VDC Electronics, Inc. The company was founded in 1993 and it is currently headquartered in Englewood, New Jersey. With an emphasis on battery management products such as battery chargers, conditioners, and many accessories, it has become a popular choice in the US.
In 2016 the company unveiled a new line of Battery MINDer battery chargers that were capable of faster charging times while also coming with new functions and protection circuitry. Many of its chargers are also good as maintainers and conditioners with a highly efficient design.
Black & Decker is an American company which manufactures power tools, hardware, accessories, as well as high-quality battery chargers that are appreciated around the world. The company was established in 1910 and has widely contributed to the home improvement products market throughout the 20th century, with innovations continuing today.
The company takes great pride in the fact that it stays focus on customers needs, with a reputation for producing a variety of high-quality devices that can suit every pocket. Many Black & Decker battery chargers come with advanced functions and safety features while providing a tremendous value for the price.
The Schumacher Electric Corporation is an American company that specializes in battery chargers, jump starters, battery testers, and other types of electrical devices. The company was founded in 1947 and has a long history of improvements that made batteries safer and more efficient. The company is now headquartered in Mount Prospect, Illinois.
Schumacher is known for its high-end battery chargers which come with modern LED displays where you can check the charging process. These also come with various features such as desulfation modes as well as a host of protection mechanisms against short-circuits, reversed-polarity, and more.
The NOCO Company is an American manufacturer of battery chargers, solar panels, as well as a wide range of portable power devices. The company was founded by Joseph Henry Nook, a tire and battery distributor, in 1914 in Cleveland, Ohio. The first product to be designed and produced was the Battery Corrosion Preventative called NCP2, the first in the world.
Despite coming a long way from its modest beginnings, the company has become one of the most recognized in the industry of battery chargers. Its quality models are suited to a variety of vehicles, from motorcycles to RVs, tractors, cars, trucks, boats, etc.
Interested in finding out more about the things you need to make your motorbike a great ride? Then check out the articles below.